1. Clean the area of the Inspire where the graphic is going to be applied.

  2. Start with the smaller decal. While making sure the decal is centered, apply it right along the bottom of the inspire body line.

  3. Apply pressure throughout the entire decal once satisfied with the alignment

  4. Apply the larger portion by starting with the front (nose) of the decal

  5.  While making sure the decal is centered between the top body lines, apply the decal with roughly a 1/8″ gap between the other decal. Apply rest of the decal while focusing on keeping it centered.

  6.  Apply pressure to all edges of the decal once you are satisfied with alignment

    Extra- If you end up with creases on the front edge of the decal, they can be removed with light heat from a hair dryer and outward pressure.